1. After the hammer crusher is installed, before the normal production, it is necessary to check whether the crushing chamber is cleaned, and clean out foreign bodies or parts from the chamber

2. Moderately reduce the height of the reinforcement plate of the hammer crusher, with the reinforcement plate 50mm higher than the grate as the standard, and can also be welded on the side of the reinforcement plate to strengthen the strength of the reinforcement plate, so as to effectively strengthen the wear-resisting ability and anti-beating ability of the heat-resistant steel grate plate

3. The operator often checks during the operation and production process. If abnormal sound is found, the machine needs to stop for inspection

4. As far as possible, the occurrence of metal blocks entering the hammer crusher can be reduced. Before passing raw materials through the crusher, magnetic separator equipment can be used to remove iron blocks and other unbreakable objects.

1, heat resistant steel grate has good wear resistance, long service life, is more than ten times of the metal screen, is 3-5 times of the ordinary rubber plate, is 2-3 times of stainless steel.

2, shock absorption noise reduction, tons of ore consumption is lower than the metal screen plate net.

3, high manganese steel sieve plate automatic cleaning, because of the characteristics of polyurethane secondary vibration, no plugging, high screening efficiency.

4, wet resistance, good wear resistance.